ULTRATHON®
Conventional Solar Street Lights
Low on Cost , High on Performance
ULTRATHON®
CONVENTIONAL SOLAR STREET LIGHT
Ultrathon’s Conventional Solar Street Light System is available from 7W to 30W with Lead Acid Tubular Battery, Solar PV Panel. Inbuilt intelligent sensor control system helps in charging the battery and switching light ON/OFF. Light is programmable and runs with 100% brightness for first 4 hours and later on switched to intelligent control. Intelligent control regulates the brightness depending on the battery availability and ensures that it gives light throughout the night.
Solar Street light automatically turns ON/OFF depending on the light intensity. Light is switched ON when darkness is detected and is switched OFF when light is detected. This features helps saving the human and material resources.
Application: It is widely used in street and roads, residential areas, scenic spots, parks, private gardens and other public areas. It helps create safer environment and can increase people our door night activities.
"Our price of conventional Solar Street Light is competitive and that of best quality."
The Maximum Power Point Tracking (MPPT) algorithm is used in advanced solar charge controllers to track the peak power delivered by a solar panel and maximize the energy harvested by the panels.
MNRE approved Solar Stationary Batteries are the integral part of the System. Solar Flooded MONOBLOC BATTERIES are designed to offer reliable, low-maintenance power for Solar Street Light where frequent deep cycles are required and minimum maintenance is desirable.
The use of the PIR motion sensor enables the adjusting of LED light brightness intelligently and can subsequently lead to energy saving.
High tensile die-casting aluminum light body, anti-corrosion, Excellent heat dissipation.
TECHNICAL SPECIFICATIONS ULTRATHON® CONVENTIONAL SOLAR STREET LIGHT
| Model No. | UEL FCL 7 W | UEL FC 9 W | UEL FC 12 W | UEL FC 15 W | UEL FC 18 W | UEL FC 24 W |
|---|---|---|---|---|---|---|
| Housing | Die Casting Aluminum Alloy with IP 67 | |||||
| Gasket | Sillicon Gasket / Water Proof / Splash Proof | |||||
| Lens Cove | Poly Carbonate Lens Cover | |||||
| Charge Controller | MPPT / PWM Charge Controller >90% Efficiency with Built in LED Driver | |||||
| LED Chip | Osram Oslon High Power Square LED Chip with LM 80 | |||||
| Battery Type (Recommended size) | Tubular Lead Acid 40Ah | Tubular Lead Acid 75Ah | Tubular Lead Acid 100Ah | |||
| Recommended Solar Panel | 40 Wp | 50 Wp | 60Wp | 75Wp | 100Wp | 120Wp |
| Dimming | 33% Dimming as per MNRE specification OR it can be changed as per customer requirement. | |||||
| Lumens (LM) | 980 – 1050 | 1260 -1350 | 1680-1800 | 2100-2250 | 2520-2700 | 2800-3000 |
| Dimension in mm | 328 X 80 X 74 | |||||
| Features Provided | |
|---|---|
| Luminary Protections | Battery deep discharge protection, Over charge protection, Load open Protection, Charging and battery indication, Reverse current flow protection, Temperature compensation, Short circuit protection |
| Optional Operational Feature | Light will glow in full bright mode for first 4Hrs, after 4Hrs. Light will Dim to 33% & motion sensor will activate for detection of motion. If any motion is detected in 12M area around the Light, it will glow in full mode for 2min. After that it will again come to 33% Power. |